SparkSwitch PRO : 6615

£90.00

Out of stock

SparkSwitch PRO

The SparkSwitch PRO is a reliable, high-performance ignition switch with telemetry function.

Features

Ignition cannot cause interference
Galvanic separation between ignition and receiver
Immune to static discharge from ignition
Regulated or unregulated output voltage
Suitable for 6.0 V, 7.4 V and even 12 V ignition systems
Monitoring of the ignition battery via telemetry
Rotational speed (rpm) and engine temperature
Two different switch modes
Compact design
Temperature sensor included

Can be updated via BlueCom or USB Interface

Technical Data

Operating voltage	4.0V – 9.0V
Current drain Power-on state	30mA
Current drain Standby	60μA
Maximum load current	max. 2A
Output voltage	5.9V / open
Signal input	PWM, P²BUS, S.BUS2
Supported telemetry systems	PowerBox, Jeti, Futaba, Graupner, Multiplex, JR
Dimensions	60 x 24 x 14 mm

Weight	16g
Temperature range	-30°C to +75°C

Product description

The SparkSwitch PRO is the logical development of the original SparkSwitch, which has been successful in the market since its introduction in 2008. The SparkSwitch PRO combines acknowledged reliability with new telemetry transmission options. The SparkSwitch PRO incorporates a genuine bi-directional infra-red connection which physically separates the receiving unit from the ignition circuit, but at the same time sends telemetry information from ignition and engine to the telemetry interface via light signal.

The available telemetry information consists of the voltage, consumed capacity and current drain of the ignition battery, together with the rotational speed (rpm) and temperature of the engine itself.

The SparkSwitch PRO operates on a range of 4V to 13V, making it suitable for use with all kinds of ignition unit. The output voltage for the ignition can be set either to a regulated 5.9V or the unregulated battery voltage.